DC Motor Seasonal Wrap Introduction 2 End Ball Bearing Stable Self Strong Locking Protectio $26 DC Motor 2 End Ball Bearing Stable Self Locking Strong Protectio Industrial Scientific Hydraulics, Pneumatics Plumbin Hydraulic Equipment 2,Bearing,End,Stable,Ball,Locking,Industrial Scientific , Hydraulics, Pneumatics Plumbin , Hydraulic Equipment,Self,Protectio,Motor,$26,DC,www.intenplat.com,/mank4788409.html,Strong $26 DC Motor 2 End Ball Bearing Stable Self Locking Strong Protectio Industrial Scientific Hydraulics, Pneumatics Plumbin Hydraulic Equipment 2,Bearing,End,Stable,Ball,Locking,Industrial Scientific , Hydraulics, Pneumatics Plumbin , Hydraulic Equipment,Self,Protectio,Motor,$26,DC,www.intenplat.com,/mank4788409.html,Strong DC Motor Seasonal Wrap Introduction 2 End Ball Bearing Stable Self Strong Locking Protectio

DC sold out Motor Seasonal Wrap Introduction 2 End Ball Bearing Stable Self Strong Locking Protectio

DC Motor 2 End Ball Bearing Stable Self Locking Strong Protectio

$26

DC Motor 2 End Ball Bearing Stable Self Locking Strong Protectio

|||

Product description

Specification:
Item Type: DC Motor
Material: Copper,Zinc Alloy
Model: 5840-555
Material: Copper, Zinc Alloy
Purpose: Industrial Drive Device
Output Shaft Size (diameter x Length):approx. 8 x 13mm / 0.3 x 0.5in
Size (Length x Width): Approx.58 x 40mm / 2.3 x 1.6in
Rated voltage DC12V parameter table current no load 0.5A load 1.2A locked rotor 4.7A Reduction ratio (change ratio) 17 31 50 100 200 290 500 No load speed rpm 470 260 160 80 40 27 12 Rated torsion kg.cm 2.5 4.5 7.3 14.5 29 42 60 Rated speed rpm 380 200 130 60 30 20 12 Maximum torsion Kg.cm 4.3 8 12.5 25 51 70 70 Rated voltage DC24V parameter table Current no load 0.25A Rated load 1.5A Locked rotor 5.2A Reduction ratio (change ratio) 17 31 50 100 200 290 500 No load speed rpm 470 260 160 80 40 27 16 Rated torsion kg.cm 8 9.5 15 30 40 50 60 Rated speed rpm 380 200 130 60 30 20 12 Maximum torsion Kg.cm 17 31 50 50 70 70 70

Package List:
1 x DC Motor

Note:
Because the locked rotor torsion of this motor is too large, during use, do not frequently reverse and reverse, do not forcefully lock the rotor, and cannot be used for a long time under a torsion higher than 40kg.cm, and cannot exceed 60kg.cm in short‑term use applications; Otherwise, the all metal gear set structure adopted immediately will still exceed the torsion limit of the material and cause damage to the reduction box gear.

DC Motor 2 End Ball Bearing Stable Self Locking Strong Protectio

Back
Back
Back